Raja Load Cell

High accuracy and high stability type.
Pressure conduit type. Airtight structure.
All stainless steel made.
Accuracy class: 0.15% RO, excluding some rated capacities.
Most suitable for use in testing machines and the like for the high accuracy detection of hydraulic pressures.

For versatile applications. High stability type.
Pressure conduit type. Airtight structure.
All stainless steel made.
Accuracy class: 0.3% RO, excluding some rated capacities.
With direct drawn out cable in the standard version. Can change to special versions with NDIS connector or with waterproof connector on optional orders.

Small size. Light weight (40 grams per unit, excluding cable).
Meeting high temperature requirement (150℃)
Using stainless steel material (SUS630) in pressure receiving surface for insuring excellent corrosion proof capabilities.
Accuracy class: 0.5% RO.

Small size. Lightg weight (40 grams per unit, excluding cable).
Vibration-proof construction (300m/s2).
Meeting high temperature requirement (150℃)
Using stainless steel material (SUS630) in pressure receiving surface for insuring excellent corrosion proof capabilities.
Accuracy class: 0.5% RO.

For versatile applications. Flush diaphragm type.
Most suitable for the measurement of high response impulsive pressures.
Covering the applications for high viscosity pressure media.
All stainless steel made.
Accuracy class: 0.3% RO excluding some rated capacities.

Small size. Flush diaphragm type.
Most suitable for the measurement of high response impulsive pressures.
Covering applications for high viscosity pressure media.
Accuracy class: 0.5% RO.

For measurement of high pressures.
Small size. Light weight (260 gr.).
Pressure conduit type. Airtight structure.
All stainless steel made.
Accuracy class: 0.3%.

Specifications

NS100A series

Feature:

Highly accurate pressure transmitter 0.2 %R.O. as a standard by SOS technology. (including Non-linearity, Hysteresis and Repeatability.)
0.1 %R.O. is also available as a high accurate type.
High reliability and durability by SOS technology.
Can correspond to the absolute pressure and compound pressure
Small size and light weight
Wide range pressure from 200 kPa to 50 MPa can be measured.
Three kinds (Cable directly connected type), (connector type) and (terminal box type)

Specifications
Rated capacity	200 kPa - 50 MPa
Safe overload	200 %R.C.
Ultimate overload	300 %R.C.
Accuracy	0.2 %R.O. (including non-linearity, hysteresis and repeatability)
Rated output	Current : 4 mA to 20 mA (2 wires method, Load resistance 500 ohm or less, at 24 V) Voltage : 0 V to 10 V (Load resistance 5 k-ohm or more)
Response frequency	1 kHz
Power supply voltage	DC 24 V(18 V to 28 V)
Power consumption	Approx. 20 mA
Insulation resistance	1 000 MΩ or more (DC 50 V)
Temp. range, compensated	-20'C to 70'C
Temp. range, safe	-30'C to 80'C
Temp. effect on zero	0.2 %R.O./10'C
Temp. effect on output	0.2 %LOAD/10'C
Connector	R03-RB5F(receptacle)
Class of protection	IP44 or equivalent
Material of pressure hole	Stainless steel
Material of cover	Alluminium alloy (with almite processing)
Material of pressure diaphragm	Single crystal sapphire, etc.,
Mounting screw	G3/8{PF}
Weight	Approx. 200 g (Main body only)
Tightening torque	20 N-m to 40 N-m {2.04 kgf-m to 4.08 kgf-m}
Special specification	NS100A-D6 : Guranteed accuracy 0.2 %R.O. at negative side. Power supply voltage : ±DC15 V NS100A-H : As an amplifier part is are separated.(The highest, environmental temperature is 200'C) NS100A-S : IP67 waterproof construction with zero adjustment factor) NS102 : Pressure inlet port : φ10

NS104 series

Feature:

Accuracy : 0.5 %R.O. including zener barrier
(0.2 %R.O. is possible by conbination adjustment separately.)
Possible to measure the compound pressure and absolute pressure with high level accuracy.
Approved Exia IIC T4 of intrinsically safe explosion proofed measurement (Technical standard)
Application
Manifold type pressure of oils and fats
Hydrogen gas supply pressure and meter

Specifications
Rated capacity	100 kPa - 50 MPa
Safe overload	200 %R.C.
Ultimate overload	300 %R.C.
Accuracy	0.5 %R.O. (including non-linearity, hysteresis and repeatability)
Rated output	Current : 4 mA to 20 mA (2-wires method, Load resistance 500 Ω or less, at 24 V)
Power supply voltage	DC 24 V (20 V to 35 V)
Insulation resistance	1 000 MΩ or more
Temp. range, compensated	-20'C to 60'C
Temp. range, safe	-30'C to 80'C
Temp. effect on zero	0.5 %R.O./10'C
Temp. effect on output	0.5 %LOAD/10'C
Cable	φ4.7, shielded cable 2 m directly attached, cable end is separated (Cable directly attached type)
Class of protection	IP43
Material of pressure hole	Stainless steel (SUS304L)
Material of cover	Aluminum alloy (with almite processing)
Material of pressure diaphragm	Single crystal sapphire
Mounting screw	1/8 - 1/4 - 3/8 G{PF}, R{PT}
Weight	Approx. 200 g (Cable directly attached type, and main body only.) Approx. 400 g (Terminal box type, and main body only)
Tightening torque	20 N-m to 40 N-m

NS403B / NS413B series

Feature:

SOS type sensor is used (--> Melt pressure sensor by SOS technology).
Mercury and push rod that decreases the temperature characteristic is not used.
High accuracy and an excellent temperature characteristic have been achieved.
Total accuracy : ±2.0 %R.O.
(Non-linearity, Hysteresis, Repeatability and temperature coefficient)
Excellent abrasion resistance and fatigue resistance have been achieved.
Common products with reasonable price.

Specifications
Rated capacity	20 MPa, 35 MPa, 50 MPa
Safe overload	150 %R.C.
Ultimate overload	200 %R.C.
Accuracy	±2.0 %R.O. (including Non-linearity, Hysteresis, Repeatability and zero / output temperature effect.)
Rated output	Current : 4 mA to 20 mA (2-wires method, load registance 500 Ω or less at 24 V.
Power supply voltage	DC 24 V (18 V to 28 V)
Power consumption	20 mA at maximum
Insulation resistance	1 000 MΩ or more (DC 50 V)
Frequency responce	DC ~200 Hz
Operating temperature range	Pressure receiving part : 25'C to 350'C Amplifier part : 0'C to 60'C
Temp. range, safe	Pressure receiving part : 25'C to 400'C Amplifier part : -10'C to 70'C
Cable	φ7, flexible hose 1 m directly attached (between sensor and amplifier)
Connector	Connector P/No. : TC1108-21B10-7F
Class of protection	IP54
Material of stem	Stainless steel
Material of screw	Stainless steel
Material of press-ure diaphragm	Single crystal sapphire
Mounting screw	NS403B : 1/2-20UNF, NS413B : G3/8{PF}
Weight	Approx. 400 g (Standard type)
Tightening torque	10 N-m to 20 N-m

NS115P / NS115 series

Feature:

Excellent in the long term stability.
Accuracy 0.1 %R.O. is available
(including non-linearity, hysteresis and repeatability)
Small size and light weight, the Cable horizontal putting out type is possible.
Excellent in solidity and a surge pressure
Attached zero point adjustment
Application
Automatic transmission testing equipment, Solenoid valve testing device, Fuel cell evaluation device

Specifications
Rated capacity	1 MPa - 10 MPa (NS115P / High-accuracy type) 5 MPa - 50 MPa (NS115 / Standard))
Safe overload	200 %R.C.
Ultimate overload	300 %R.C.
Accuracy	0.1 %R.O. (NS115P / High-accuracy type) 0.5 %R.O. (NS115 / Standard type)) (including non-linearity, hysteresis and repeatability)
Rated output	Current : 4 mA to 20 mA (2 wires method, Load resistance 500 Ω or less, at 24 V) Voltage : 0 V to 5 V, 0 V to 10 V (Load resistance 5 kΩ or more).
Zero adjustment range	±1 %
Power supply voltage	DC 24 V(18 V to 28 V)
Power consumption	Approx. 20 mA
Insulation resistance	1 000 MΩ or more (DC 50 V)
Temp. range, compensated	-20'C to 70'C
Temp. range, safe	-30'C to 80'C
Temp. effect on zero	0.15 %R.O./10'C (NS115P / High-accuracy type) 0.5 %R.O./10'C (NS115 / Standard type)
Temp. effect on output	0.15 %LOAD/10'C (NS115P / High-accuracy type 0.5 %LOAD/10'C (NS115 / Standard type)
O-ring seal	FKM4-class D (High-accuracy type), NBR(Standard type) Selectable by the medium.
Class of protection	IP67 (NS115P/High accuracy type with receptacle R04-R5F : IP65))
Material of pressure hole	SUS316L (high-accuracy type), SUS304L (Standard type)
Material of cover	SUS316 (high-accuracy type), Aluminium (Standard type)
Material of pressure diaphragm	Single crystal sapphire
Mounting screw	1/8 - 1/4 - 3/8G{PF}, {PT}
Weight	NS115 : Approx. 200 g, NS115P : 250 g (Main body only)
Tightening torque	20 N-m to 40 N-m

PRN01 / PRN02 Series

Feature:

ASIC(Application Specific I.C.) amplifier is installed.
High performance type pressure transmitter with a little temperature effect and excellent in noise.
Total accuracy : ±1.0 %F.S.
(Including the temperature effect from -20'C to 70'C.)
The newly developed high stability and low current strain gage has been used for the diaphragm made of 17-4 PHs.
Application
Injection molding machine, Press machine, Various pump systems, Hydraulic apparatus

Specifications
Rated capacity	5 MPa~100 MPa
Safe overload	150 %R.C.
Ultimate overload	200 %R.C.
Accuracy	±1.0 %F.S. (including non-linearity, hysteresis, repeatability)
Rated output	Current : 4 mA to 20 mA Voltage : 0 V to 5 V, 1 V to 5 V
Response frequency	1 kHz
Power supply voltage	DC12 V to 28 V
Insulation resistance	1 000 MΩ or more (DC50 V)
Temp. range, compensated	-20'C to 70'C
Temp. range, safe	-30'C to 80'C
Temp. effect on zero	±1.0 %F.S./-20'C to 70'C
Temp. effect on output	±1.0 %F.S./-20'C to 70'C
Cable	φ4.7, shielded 1 m cable directly attached, cable end is separated(Cable directly attached type : PRN01)
Class of protection	IP65
Material of element	Stainless steel (17-4PH)
Mounting screw	G3/8{PF}, R1/2{PF} (PRN01/02-100MP : G1/2{PF}, R1/2{PF})
Weight	Approx. 70 g

NS10T series for Compound pressure measurement

Feature:

High accuracy 0.2 %R.O.
(including Linearity, Hysteresis and Repeatability)
Available for 0.1 %R.O. for more accurate model
The manifold type pressure from -100 kPa to each rated capacity (200 kPa to 10 MPa) can be measured by high accuracy and the high response.
Low pressure measurement with rated capacity of 200 kPa or 500 kPa
Measurable in low and high temperature environment.
Temp. range, compensated is from -20'C to 120'C for standard model, and from -40'C to 150'C for special model.
Quick response with natural frequency from 72 kHz to 1 278 kHz (5 times of stainless steel)
Application
Automatic transmission or engine test stand.
Changeable valve lift mechanism testing instrument and various test benches, Solenoid valve experiment device, Calorie meter, CO2 compressor, Flow measurement device

Specifications
Parts No.	5 MPa~100 MPa
Rated capacity	150 %R.C.
Safe overload	200 %R.C.
Ultimate overload	±1.0 %F.S. (including non-linearity, hysteresis, repeatability)
Accuracy	Current : 4 mA to 20 mA Voltage : 0 V to 5 V, 1 V to 5 V
Rated output	1 kHz
Excitation, recommended	DC12 V to 28 V
Excitation, maximum	1 000 MΩ or more (DC50 V)
Zero balance	-20'C to 70'C
Input resistance	-30'C to 80'C
Output resistance	±1.0 %F.S./-20'C to 70'C
Insulation resistance	±1.0 %F.S./-20'C to 70'C
Temp. range, compensated	φ4.7, shielded 1 m cable directly attached, cable end is separated(Cable directly attached type : PRN01)
Temp. range, safe	IP65
Temp. effect on zero	Stainless steel (17-4PH)
Temp. effect on output	G3/8{PF}, R1/2{PF} (PRN01/02-100MP : G1/2{PF}, R1/2{PF})
Class of protection	Approx. 70 g
Material of pressure hole	Stainless steel (SUS304L)
Material of diaphragm	Single Crystal Saphire
Mounting screw	G3/8
Tightening torque	20 N･m to 40 N･m
Cable	φ3.8,shielded high temperature 3 m cable directly attached, cable end is separated
Weight	Approx. 200 g (main body only)

NS30T (- H) series for Compound pressure measurement

Feature:

Light weight and Compact size
φ15 mm x Approx.40 mm, Weight 50 g
High accuracy 0.2 %R.O.
(including Linearity, Hysteresis and Repeatability)
Available for 0.1 %R.O. for more accurate model
The manifold type pressure from -100 kPa to each rated capacity (200 kPa to 10 MPa) can be measured by high accuracy and the high response.
Low pressure measurement with rated capacity of 200 kPa or 500 kPa.
Measurable in low and high temperature environment.
Temp. range, compensated is from -20'C to 120'C for standard model, and from -40'C to 150'C for special model.
Quick response with natural frequency from 72 kHz to 1 278 kHz (5 times of stainless steel)
Application
Experimental use of automatic transmission engine, Various test benches, Solenoid valve experiment device,Calorie meter, CO2 compressor, Flow measurement device

Specifications
Parts No.	NS30T
Rated capacity	200 kPa~10 MPa
Safe overload	200 %R.C.
Ultimate overload	300 %R.C.
Accuracy	0.2 %R.O. / 0.1 %R.O. for high accurate model (including non-linearity, hysteresis and repeatability)
Rated output	1.5 mV/V±0.15 mV/V (NS30T-200KP/-500KP : 1.0 mV/V±0.10 mV/V)
Excitation, recommended	DC10 V
Excitation, maximum	DC15 V
Zero balance	±0.05 mV/V
Input resistance	700 Ω to 1 000 Ω
Output resistance	700 Ω to 1 000 Ω
Insulation resistance	5 000 MΩ
Temp. range, compensated	-20'C to 120'C
Temp. range, safe	-40'C to 160'C
Temp. effect on zero	0.2 %R.O./10'C
Temp. effect on output	0.2 %LOAD/10'C
Class of protection	IP65
Material of pressure hole	Stainless steel (SUS304L)
Material of diaphragm	Single Crystal Sapphire
Mounting screw	G1/8
Tightening torque	20 N-m to 40 N-m
Cable	φ3.8,shielded high temperature 3 m cable directly attached, cable end is separated
Weight	Approx. 50 g (only main body)

Specifications

PRB series

Feature:

Small size, light weight, easily attached and detached.
Abundant lineups corresponding to wide-range pressure.

Specifications
Rated capacity	1 MPa~100 MPa
Safe overload	150 %R.C.
Ultimate overload	300 %R.C.
Rated output	1.5 mV/V±0.015 mV/V (PRB-1MP : 1 mV/V±0.01 mV/V)
Non-linearity	0.2 %R.O. (PRB-1MP : 0.3 %R.O.)
Hysteresis	0.2 %R.O. (PRB-1MP : 0.3 %R.O.)
Repeatability	0.3 %R.O.
Excitation, recommended	6 V or less
Excitation, maximum	10 V
Zero balance	PRB-1MP : ±0.05 mV/V PRB-2MP~100MP : ±0.045 mV/V
Input resistance	350 Ω±3.5 Ω
Output resistance	350 Ω±3.5 Ω
Insulation resistance	1 000 MΩor more.((DC 50 V) (between lead and main body.)
Temp. range, compensated	-10'C to 60'C
Temp. range, safe	-15'C to 100'C
Temp. effect on zero	0.2 %R.O./10'C
Temp. effect on output	0.2 %LOAD/10'C
Connector	with NDI-7P-R(receptacle) Connector P/N : PRC03-21A10-7F
Cable	CAC-101-5M (Options)
Class of protection	IP64
Material of element	PRB-200KP to 500KP : Beryllium steel, (Part of pressure diagram is stainless steel.) PRB-1MP to 100MP : Stainless steel
Mounting screw	G3/8{PF} (PRB-100K : G1/2{PF})
Weight	PRB-1MP~-10MP : Approx. 220 g PRB-20MP~-50MP : Approx. 300 g PRB-100MP : Approx. 450 g

Specifications

PRC series

Feature:

High response typ with flash diaphragm.
Compact size, Easy mounting or detaching.

Specifications
Rated capacity	1 MPa-100 MPa
Safe overload	150 %R.C.
Ultimate overload	300 %R.C.
Rated output	1.5 mV/V±0.15 mV/V (PRC-1MP : 1 mV/V (+0.2, -0.1) mV/V)
Non-linearity	0.5 %R.O.
Hysteresis	0.5 %R.O.
Repeatability	0.5 %R.O.
Excitation, recommended	3 V or less
Excitation, maximum	6 V
Zero balance	±0.225 mV/V (PRC-1MP : ±0.25 mV/V)
Input resistance	120 Ω±1.2 Ω
Output resistance	120 Ω±1.2 Ω
Insulation resistance	1 000 MΩ or more (DC 50 V) (between bridge and main body)
Temp. range, compensated	-10'C to 50'C
Temp. range, safe	-10'C to 75'C
Temp. effect on zero	0.8 %R.O./10'C
Temp. effect on output	0.8 %LOAD/10'C
Cable	φ6.3, 4 -cores 30 cm cable directly attached with NDI-7P-J (Jack) at the cable end Connector type : PRC03-32A10-7F10.5
Class of protection	IP64
Material of element	Stainless steel
Mounting screw	G3/8{PF}
Weight	Approx. 120 g

Specifications

PRJ series

Feature:

Use upto a temperature (150'C)
Compact size and light weight, easy to install/detach.

Specifications
Rated capacity	1 MPa~10 MPa
Safe overload	150 %R.C.
Ultimate overload	300 %R.C.
Rated output	PRJ-1MP : 1 mV/V±0.2 mV/V PRJ-2MP : 1.5 mV/V±0.3 mV/V PRJ-5MP~10MP : 1.5 mV/V±0.15 mV/V
Non-linearity	0.3 %R.O.
Hysteresis	0.3 %R.O.
Repeatability	0.3 %R.O.
Excitation, recommended	6 V or less
Excitation, maximum	10 V
Zero balance	±0.05 mV/V
Input resistance	373.6 Ω±5 Ω
Output resistance	350 Ω±5 Ω
Insulation resistance	1 000 MΩ or more (DC 50 V) (between bridge to main body)
Temp. range, compensated	-40'C to 150'C
Temp. range, safe	-40'C to 165'C
Temp. effect on zero	0.25 %R.O./10'C
Temp. effect on output	0.5 %LOAD/10'C
Cable	φ5.6, 4 -cores shielded 1.5 mcable for high temperature directly attached with NDI-7P-J(Jack) at the cable end.
Class of protection	IP60
Material of element	Stainless steel
Mounting screw	R1/8{PT}
Weight	Approx. 45 g (PRJ-10MP : Approx. 60 g)

Specifications

STD series

Feature:

High pressure measurement
Pressure receiving part is the integration structure with thread.
Application
High level oil pressure and hydraulic system, Hydro-forming machine, Diesel engine common rail oiltight device

Specifications
Rated capacity	200 MPa - 500 MPa
Safe overload	120 %R.C.
Ultimate overload	120 %R.C.
Rated output	STD-200MP - 400MP : 1 mV/V±0.0025 mV/V STD-500MP : 0.75 mV/V±0.007 5 mV/V
Non-linearity	STD-200MP - 400MP : 0.35 %R.O. STD-500MP : 0.5 %R.O.
Hysteresis	0.1 %R.O.
Repeatability	0.05 %R.O.
Excitation, recommended	6 V or less
Excitation, maximum	10 V
Zero balance	STD-200MP - 400MP : ±0.025 mV/V STD-500MP : ±0.019 mV/V
Input resistance	120 Ω±2.4 Ω
Output resistance	118.5 Ω±2.4 Ω
Insulation resistance	1 000 MΩ or more (DC 50 V) (betwee bridge and main body)
Temp. range, compensated	-10'C to 75'C
Temp. range, safe	-10'C to 75'C
Temp. effect on zero	0.09 %R.O./10'C
Temp. effect on output	0.09 %LOAD/10'C
Cable	φ6.3, 4-cores shielded 3 m cable directly attached, Y-crimp type terminal lugs are attached at cable end.
Class of protection	IP64
Material of element	Stainless steel
Mounting screw	G1/2{PF} (STD-500MP : G3/4{PF})
Weight	Approx. 1.4 kg